How do I change my wi-fi name and password?
Elong 4353 modem https://1921680.one/ Make sure your Belong modem is plugged in and your device is attached in your Belong community. Open a brand new internet browser. In the URL bar enter: http://10.Zero.0.138 (this is your default gateway get entry to - these details also can be observed at the lower back or bottom of your Belong modem). Enter the username: admin and password: Belong (those also can be found at the returned or bottom) of your Belong modem. Once you’re via to the next page, choose ‘Wi-Fi’. Select ‘2.4GHz’ or ‘5GHz’ depending on which Wi-Fi network you need to exchange. Check ‘Enable’ is set to ‘On’. From here you can personalize each the ‘Network Name’ (SSID) area and ‘Network Key’ (password) subject. Scroll down and click on ‘Apply’. Once changed, any gadgets which can be presently connected (or were previously related) could be eliminated from the network and could need to connect once more the use of the new info. Your modem transmits a signal on a particular channel. Changing the channel can enhance coverage and assist keep away from interference. With some trial and error, you can locate one channel that works pleasant for you - we recommend trying channels 1, 6 and eleven for two.4GHz and channels 36, fifty two, one hundred, 132 and 149 for 5GHz WiFi community. Sagemcom F@st 4315 Open your web browser and navigate to 10.Zero.0.138 in the address bar When brought on for a username and password to login for your modem web page, enter the username and password placed on the back of your modem (Note: these are case sensitive) Select ‘Wireless’ on the primary web page From the ‘Wireless’ drop down menu select 'Basic' Customise the Network Name in the SSID field and then click ‘Apply’ To customize the wi-fi password, choose the ‘Security’ menu and edit the WPA/WAPI passphrase area then click ‘Apply’ Once modified, any devices which can be presently related, or have been formerly linked, will be removed from the network and will need to connect again the use of the brand new details. Your modem transmits a signal on a selected channel. Changing the channel can enhance insurance and help avoid interference. With a few trial and error, you could discover one channel that works fine for you – we advocate trying channels 1, 6 and 11. Technicolor TG797n V3 modem Open your web browser and navigate to 10.0.0.138 inside the address bar Select ‘Wireless’ on the primary web page or below Local Network Select ‘Configure the principle WLAN’ Edit the ‘Network Name’ within the SSID field and the ‘Wireless Password’ in the WPA-PSK Encryption Key subject then click on Apply Once changed, any devices that are currently linked, or had been previously related, may be eliminated from the network and could want to attach again using the new details. Your modem transmits a signal on a particular channel. Changing the channel can enhance coverage and help avoid interference. With some trial and blunders, you could find one channel that works satisfactory for you – we endorse trying channels 1, 6 and eleven.

Leave a Reply

Your email address will not be published. Required fields are marked *